TKC頭盔耐穿透及碰撞性能試驗機
一、產品介紹：
頭盔耐穿透及碰撞性能試驗機用于檢驗摩托車用頭盔的耐穿透及碰撞性試驗，是摩托車用頭盔的專用檢測設備。是生產廠家、檢測機構、監(jiān)督部門、大專院校、科研單位及仲裁機構的**測試設備。
二、頭盔耐穿透及碰撞性能試驗機特點：
1 既可實現(xiàn)頭盔耐穿透實驗，又可以實現(xiàn)碰撞實驗。一機多能。
2 設計科學，結構合理，操作簡便，迅速準確。
3 雙柱式結構，落點準確，能量損失小
4 使用高精度的加速度及位移傳感器，保證測量的準確可靠。
5 碰撞實驗也可以由計算機控制，可以對力值、曲線、頻率顯示和分析
三頭盔耐穿透及碰撞性能試驗機 符合標準
符合GB811標準的要求
四、頭盔耐穿透及碰撞性能試驗機主要技術指標
1、落盔高度：全盔3000±2mm±半盔2000±2mm
碰撞高度：1830±2mm
2、加速度傳感器的測量范圍：0-1500g
3、作用時間測量精度：0.1ms
4、錘重：30000-50g
5、頻率響應范圍；0-1000Hz
6、測量不確定度：5%
7、電源：VC380V，50Hz
TKC helmet penetration and collision resistance tester
Product introduction:
Helmet penetration and collision resistance tester used for testing the resistance to penetration of motorcycle helmets and PengZhuangXing test, is a motorcycle helmet, dedicated testing equipment.Is the manufacturer, inspection agencies, supervision departments, universities and colleges, scientific research units and the arbitration institution of choice for test equipment.
Second, the helmet penetration and collision resistance testing machine features:
1 both can realize helmet penetration resistance experiment, and can realize the collision experiment.One machine can.
2 design science, reasonable structure, easy operation, fast accurate.
3 double column type structure, accurate placement, energy loss is small
4 use acceleration and displacement sensors with high resolution, ensure the accurate and reliable measurement.
5 collision experiments can also be controlled by computer, can the force value, curve, frequency display and analysis
Accord with a standard three helmet penetration and collision resistance testing machine
In line with the requirements of GB811-2010 standard
Four, helmet penetration and collision resistance tester main technical indicators
1, a helmet is highly: QuanKui 3000 + 2 mm + BanKui 2000 + 2 mm
Collision height: 1830 + 2 mm
2, the acceleration sensor measurement range: 0-1500 - g
3, action time measuring accuracy: 0.1 ms
4, hammer weight: 30000-50 g
5, frequency response range;0-1000 hz
6, the uncertainty of measurement: 5%
7, power supply: VC380V, 50 hz
